Doepfer MCV4 MIDI-to-CV Interface

The Doepfer MCV4 MIDI-to-CV Interface is a compact and external solution to turn your digital control signals into analog CV outputs. Plenty of CV signal outputs and an immediately easy-to-understand front panel at an unbeatable price.

€119.00 €99.17

Availability: Limited stock

Ships Monday, September 25 if ordered in the next 1 day, 23 hours and 48 minutes!

SKU
DOMCV4

The Doepfer MCV4 MIDI-to-CV Interface is a compact and external solution to turn your digital control signals into analog CV outputs. Plenty of CV signal outputs and an immediately easy-to-understand front panel at an unbeatable price.


MCV4 is a budget-priced MIDI-to-CV-Interface to control vintage monophonic synthesizers via MIDI. 
MCV4 is provided with 4 analog control voltage outputs (CV1...4) and one Gate/Trigger output. 

- 4 analog control voltages CV1...CV4 

- voltage range for CV1...4: 0...+5V, 8 Bit resolution (equivalent to 1/4 semitone resolution) 

- CV1 for pitch control (normally VCO CV) 

- CV2...4 for voltage control of other functions (e.g. VCF frequency, loudness, modulation) 

- MIDI control of CV1..4: 
- CV1: note on/off with pitch-bend, 1V/octave characteristic 
- CV2 monophic after-touch 
- CV3 velocity and/or volumen (controller #7) 
- CV4 velocity and/or any controller (setting of the controller number via learn button) 

- pitch-bend is used for CV1 generation with 1/4 semitone resolution 

- gate output type can be selected via jumper inside the device between voltage trigger (+5V or power supply voltage) and S-trigger (switched trigger) 

- MIDI channel and reference note for CV1=0V adjustable via learn button 

- different assign modes for CV1 (highest note, last note, reference note) 

- retrigger on/off while playing legato 

- gate/trigger polarity normal/inverted 

- two 1/4" stereo jack sockets for CV1/2 and CV3/4 

- 1/4" mono jack socket for gate/trigger 

- learn button with LED for adjusting MIDI channel, reference note for CV1, controller for CV4 

- optical display of gate/trigger via LED 

- MIDI-In, MIDI-Thru 

- non-volatile memory for parameter settings 

- external AC adapter for power supply (AC adapter for 230V AC, included) 

More Information
Category Filter Accessories, MIDI-CV interface
Width (HP) N/A
Depth (mm) N/A
Skiff friendly No
Stock Text N/A
Stock Message N/A
Order Processing Time N/A
Expected In-Stock Date N/A
On Pre-Order Until N/A
Pre-Order Text N/A
Hide Ship Date? No
Write Your Own Review
You're reviewing:Doepfer MCV4 MIDI-to-CV Interface