Doepfer A-186-1 Gate/Trigger Combiner

Doepfer A-186-1 Gate/Trigger Combiner is an essential part of adding swing to a clock sequence. It is also a good way to create polyrhythmic structures emanating from multiple divisions and multiplications of clock signals. Imagine this module sitting next to your favourite clock divider.

€44.00 €36.67

Availability: In stock

Ships tomorrow if ordered in the next 17 hours and 56 minutes!

SKU
A-186-1

Doepfer A-186-1 Gate/Trigger Combiner is an essential part of adding swing to a clock sequence. It is also a good way to create polyrhythmic structures emanating from multiple divisions and multiplications of clock signals. Imagine this module sitting next to your favourite clock divider.


The Doepfer A-186-1 Gate/Trigger Combiner is a very simple, passive unit that combines up to 7 gate, trigger or analog signals by or-wiring.

Function:

if all seven inputs are low or open the output is low

if one or more of the seven inputs is "high" the output turns high

Applications:

  • combination ("or"-wiring) of gate and/or trigger signals (e.g. from LFOs, sequencers, keyboards, Midi-to-CV interfaces, ribbon controller, theremin, trigger delays or any other source of gate/trigger signals
  • Maximum extractor for analog voltages: at the output the maximum voltage (minus ~ 0.7V because of the diodes) appears, similar function as the maximum output of the A-172 Maximum/Minimum Selector module, e.g. for simple waveshaping 
  • simple half-wave rectifier
More Information
Width (HP) 4
Depth (mm) 20
Skiff friendly Yes
Write Your Own Review
You're reviewing:Doepfer A-186-1 Gate/Trigger Combiner