Doepfer A-160-1 Clock/Trigger Divider

Doepfer A-160-1 Clock/Trigger Divider is a simple yet really usable clock divider in ryhtmic and even audio switching patches. Plugging the divisions into everything can show the power and complexity of the modular synthesizer. It is terribly good to see and hear several synchronised "heartbeats" at different events of your system.

€65.00 €54.17

Availability: Limited stock

Ships Monday, November 20 if ordered in the next 2 days, 9 hours and 2 minutes!

SKU
A-160

Doepfer A-160-1 Clock/Trigger Divider is a simple yet really usable clock divider in ryhtmic and even audio switching patches. Plugging the divisions into everything can show the power and complexity of the modular synthesizer. It is terribly good to see and hear several synchronised "heartbeats" at different events of your system.


Doepfer A-160-1 Clock/Trigger Divider is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface. At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64. The low/high levels of the output signals are 0V and about +10V. The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.

The Clock Divider can be used in combination with the A-161 Clock Sequencer to produce stepped sequences with a length of from one to eight events.

For more detailed information please look at the English user's manual

More Information
Width (HP) 4
Depth (mm) 40
Skiff friendly No
Write Your Own Review
You're reviewing:Doepfer A-160-1 Clock/Trigger Divider