Doepfer A-138m Matrix Mixer
Availability: In stock
Ships tomorrow if ordered in the next 14 hours and 41 minutes!
Doepfer A-138m Matrix Mixer is the gateway for making your modulation signals more complex in multichannel setups. It works well with audio and CV signals too, and can be used as an offset generator too. Have you thought of adding clock sources to it? The list is just endless.
The Doepfer A-138m Matrix Mixer is a 4 x 4 matrix mixer with switches for unipolar/bipolar mode for each column. Unipolar means that the controls work as attenuators. Bipolar means that the controls work as polarizers. In this mode the amplification is zero in the middle position of the corresponding control. Turning the knob counterclockwise from the center position the signal is subtracted from the output sum with increasing amount (i.e. negative). Turning the knob clockwise from the center position the signal is added to the output sum with increasing amount. The module is DC-coupled and can be used for both audio and control voltage mixing. By means of an internal jumper one can select if the four upper controls work as DC offset generators - provided that no patch cord is plugged into the upper input socket. If this feature is not required it can be deactivated by removing the jumper on top left of the pc board. The function is identical to the A-138a/b.