Cwejman NS-4 Noise-SampleHold-Lag
The Cwejman NS-4 Noise-SampleHold-Lag is a less wide source of top-notch randomness. Apart from 3 high-quality noise generators, you can get smooth and stepped outputs derived from these signals.
€392.00
Availability:
Out of stock
SKU
CVNS4
The Cwejman NS-4 Noise-SampleHold-Lag is a less wide source of top-notch randomness. Apart from 3 high-quality noise generators, you can get smooth and stepped outputs derived from these signals.
The Cwejman NS-4 Noise-SampleHold-Lag is a true analogue noise generator with four oise/random signal outputs; Sample and Hold (S/H), White, Pink and Red.
S/H
- The S/H generates a random signal controlled by two voltage controlled parameters; RATE and LAG (slew rate).
- The RATE controls the period for every sample point from 10 seconds (0.1 Hz) to 2 millisecond (500Hz).
- The LAG controls the slew rate of the incoming S/H signal from 0.1 Hz to 1000 Hz.
- The outgoing signal is, in other words, filtered by a voltage controlled low pass filter with 12 dB/octave slope.
- The S/H RATE and the S/H LAG can be controlled manually by knobs and by external signals (RATE CV and LAG CV). Rate generator can be sync-ed by an external signal and with any shape (S/H TRIG input).
- The S/H can be also used for an external signal (EXT S/H) and the level of incomming signal is controlled manually (EXT S/H LEVEL).
WHITE noise
white noise is a full audio bandwidth noise generator.
PINK noise
pink noise is a filtered white noise generator by 3dB/octave across the whole audio frequency range.
RED noise
red noise is hard filtered and contains essentially only frequencies up to 200 Hz.
English Manual (pdf)
Write Your Own Review