WMD - SSM Expand

WMD - SSM Expand is the expansion module for the Sequential Switch Matrix which is a mega-project: a sequential switch is designed like your a traditional remote control, except that your sequential switch is controlled by external CV signals, that dictate the switching. Now the SSM realises this in a matrix-fashion: combining various sources for triggering, making new waveforms and shapes at audio rate, it is a lot to have in one truly special module!
154,00 € 128,33 €

Наличие: Limited stock

Ships today if ordered in the next 27 minutes!

SKU
wmdSSMex

WMD - SSM Expand is the expansion module for the Sequential Switch Matrix which is a mega-project: a sequential switch is designed like your a traditional remote control, except that your sequential switch is controlled by external CV signals, that dictate the switching. Now the SSM realises this in a matrix-fashion: combining various sources for triggering, making new waveforms and shapes at audio rate, it is a lot to have in one truly special module!


WMD - SSM Expand

Features

Gate/Trigger Outputs of Each Route

Gates Mirror Routing LEDs

Triggers Occur on Steps

Step Output For CV and Step/Reset

Retrigger Gates on Step Optional

Gate/Trig Behavior Invertable

CV and Knob for Trigger Length

Four Bit DAC Outputs for Outs 3/4

Skiffable PCB Design

8 HP

+40mA/-3mA Current Consumption

Expand Concept

The SSM Expand 8 HP module provides extended functionality of the SSM.

Gate/Trig: Gate (Green LED lit) provides 10V outputs for each routing button. It mirrors the routing shown by the SSM LEDs. Trig mode (Red LED lit) will output a trigger when a step (CV, Step/Gate or Reset) is taken. Pushing a routing button will not change the output thus providing synchronized triggers.

Trigger Length: CV and knob provide adjustable trigger length.

Retrig on Step: When on, gates and triggers will retrigger quickly when a step is taken.

Invert Behavior: When on, routings that are OFF will produce ON triggers or Gates.

DAC3/4: Two 4 bit DAC outputs that output a weighted 4 bit voltage between 0 and 5 volts. From routing columns 3 and 4.

Step: Outputs a trigger for each step, reset or CV change that is made to the SSM.

Installation: Connect the 20 pin ribbon cable to the GTExp header on the SSM, and the ToSSM connector on the Expand. Red Stripe Down.

Specs: 8 HP. 25mm Depth. 10V Gate Outputs. Current consumption is +40mA, -3mA. 12 month warranty.

Specs & Notes

Width: SSM 16 HP. Expand 8 HP.

Current consumption: SSM +80mA/-32mA. Expand +40ma/-3mA.

Voltage Levels: Input range +-10V. Output range +-10V. Step/Gate and Reset sense signals at 0.8V.

Operating Frequency: Maximum transition frequency is 26kHz. Pushing buttons at high clock speeds will slow the response as the buttons are debounced.

Compare Input: +-10V. Normaled to 0.5V.

Depth: SSM & Expand - 25mm with connectors

Compliance: The SSM and Expand are RoHS and CE compliant.

Warranty: The SSM and Expand are covered under warranty for 12 months after purchase. Please contact us if you ever have problems. We will take care of you.

Manual is available as a PDF.

More Information
Width (HP)8
Depth (mm)25
Skiff friendlyДа
Write Your Own Review
You're reviewing:WMD - SSM Expand