Malekko - Richter Envelator
Наличие: Available in 2-3 weeks
The Malekko - Richter Envelator is one of the most interesting envelope generators out there that can be accustomed to a lot of different patches. Multiple stages of envelopes, voltage control of their shapes and an LFO mode are all available.
Malekko – Richter Envelator - Analog Multi-function Envelope Module
Malekko is thrilled to offer the Wiard Envelator. Sanctioned by Grant Richter of Wiard Synthesizer Company, this a euro-rack version of the infamous 300 Series Envelator module.
This unit is a classic AD function generator that can act as a attack/decay envelope generator, a attack/release envelope generator or as a LFO with an interesting delay function.
Using the CV inputs for controlling the A/D times will create living modulations and the two pulse outputs allow for triggering other envelopes for instance.
Attack and decay times: 1ms to 20s. when pulling the attack control (push/pull potentiometer with switching function) the time factor is multiplied by factor 10.
Both time segments can be modulated with CVs at the attenuated AMod and DMod inputs.
In the AD-Mode the gate length is being ignored and allows for very short, percussive envelopes.
The cycle mode turns the Envelator into an LFO which waveform ranges from sawtooth over triangle to ramp, depending on the A/D segement times. Frequencies in lower audio range are possible as well.
The delay function can be enabled with a further push/pull pot and is active only in cycle mode. the delay time sets the time interval between repeats of the A/D cycles and can be modulated by CVs. The delay makes possible very interesting percussive rolls and repeats in combination with rhythmical structures (eg sequencers).
The outputs SQR and END generate opposite pulse waves eg. for triggering other modules, very handy!