Intellijel designs - Azimuth 2
Наличие: В наличии
Ships today if ordered in the next 41 minutes!
The Intellijel designs - Azimuth 2 is one of the most well-designed panning modules out there. If you want to upgrade your modular to stereophonic levels, this is the best-sounding and most well-designed way to go!
Intellijel Designs Azimuth II
Panner/Stereo Balance/Cross Fader/Dual VCA in 8HP
- Uses high quality THATcorp VCA chips
- Implements panning using a unique constant power panning circuit (most accurate method for controlling sound placement in a stereo image).
- High dynamic range for VCA gain with 0-5V giving approximately -80db to +3dB
- Separate inputs for bipolar and unipolar control of the Panning/XFading
- Jumper on PCB to select bipolar voltage range: either +/-2.5V or +/-5V
- Unique Vactrol based Stereo Width circuit: Used with stereo signal to vary the perceived stereo width from mono to stereo and slightly beyond using negative cross bleed.
- Bypass switch to disable the Width circuit
- Dedicated attenuator for the bipolar pan cv source.
Modes: (determined via the jack normalizing/patching and mode switch)
- With audio connected to the Left Input, panning control steers the signal to the Left or Right output using constant power panning.
- Stereo Balance
- With a stereo audio source plugged in to the Left and Right inputs,
- panning controls the balance between these two sources using constant power panning.
With two audio sources patched into the Left and Right inputs respectively the panning controls now act as crossfade controls. The resultant signal is is routed to the Left Output.
- With the Pan control centered and the VCA gain knobs fully CCW this module becomes a dual exponential VCA
- Separate L and R VCA CV controls but there is also a “both” control
- for using a single CV source to control the VCAs in stereo.