Expert Sleepers - ESX-8MD MIDI/DINsync Expander MK2
Наличие: Limited stock
Ships Monday, August 20 if ordered in the next 2 days and 26 minutes!
The Expert Sleepers - ESX-8MD MIDI/DINsync Expander adds 8 extra MIDI/DINsync outs for your eurorack modular system - by the help of this module and other main modules such as the ES-3, ES-5 and ES-40, any digital or analog signal can be translated into MIDI/DIN Sync. ÿ
Expert Sleepers - ESX-8MD MIDI/DINsync Expander
The ESX-8MD is an expansion module for the ES-4, ES-40 or ES-5, adding eight MIDI/DINsync outputs from one expansion header.
The ES-4/5 Controller software (part of Expert Sleepers Silent Way) also allows the ESX-8MD outputs to be used for MIDI output* (note - not just MIDI clock output, but as an actual MIDI port, capable of sending any MIDI messages). Since these outputs are driven from an audio connection, they have sample-accurate timing, which no USB MIDI interface can claim.
The Silent Way Sync plug-in would typically be used to send DINsync to the ESX-8MD, though any software capable of addressing the ES-4/5's expansion headers, via Silent Way or the Max/MSP external, can send clock pulses to it.
* Note - the MIDI out feature is only officially supported at sample rates of 48kHz and above, though some users report success with specific hardware when running at 44.1kHz.
Expert Sleepers ESX-8MD Multiple MIDI outs demo on Vimeo.
- The ESX-8MD's specifications are as follows:
- Panel width: 10HP
- Module depth: 27mm
- Digital input: connection from ES-4, ES-40 or ES-5 module
- Outputs: 8 5-pin DIN sockets, wired for both MIDI and DINsync
- Each channel is wired individually for MIDI (8 simultaneous outputs)
- Channels are wired in pairs for DINsync (4 simultaneous outputs, each duplicated on two sockets)
- Indicators: 1 LED per channel indicating activity
- Current draw: 12mA on the +12V rail, 0mA on the -12V rail (12mA total)
The front panel is drilled for both Doepfer and Analogue Systems mounting holes (using a 'slot' rather than a single round hole). The power connector is a Doepfer standard 10 way IDC, with -12V furthest from the top of the board.
For more detail, please see the user manual.
The ESX-8MD requires software in order to operate, as noted above. Currently, the only such software is Expert Sleepers Silent Way, and our Max/MSP external. Note that MIDI functionality is only available via Silent Way.
Silent Way is available in AudioUnit, VST & AAX formats for Mac OS X and Windows. Use of Silent Way therefore requires a compatible host application (DAW).
A Silent Way licence is not included with the ESX-8MD.