Dynaudio BM 9S

805,20 € 671,00 €

Наличие: Нет в наличии

BM 9S200W

The BM9S II is specifically designed to complement BM Compact mkIII and BM5 mkIII monitors, adding extended bass in smaller mixing and recording environments.

BM MK II part 2
System: Precision Subwoofer
Frequency Response: 29 Hz to 250 Hz
Inputs: LFE/Slave, SAT/SUB, XLR right/left full bandwidth
XLR Input impedance: + branch 20 kOhm, – branch 10 kOhm
Sensitivity: 75 mVRMS to 5 VRMS, adjustable
Max. Input voltage: 10 VRMS
Outputs: Slave, SAT/SUB, XLR right/left, High-pass filtered
XLR Output impedance: 100 Ohm (each branch)
XLR Pin-out: 1: 0 / 2: + / 3: –Specification sheet for BM MK II part 1
Mode selector: LFE, Slave (Phase and volume controls are bypassed in slave mode
SAT High-pass: Flat, 60 Hz, 80 Hz
SUB Low-pass: 50 Hz to 150 Hz
Auto ON/OFF: Automatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15 to 20 min.
Amplifier power: 200 W, 4 Ohm
Power consumption: <16 W Standby, 325 W Max.
Woofer: 240 mm/10” One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4”, Pure aluminum voice coil
Weight: 8,8 kg. / 19.4 lbs
Dimensions (WxHxL): 290 x 290 x 300 mm / 11.4” x 11.4” x 11.8”

More Information
Width (HP)Н/Д
Depth (mm)Н/Д
Skiff friendlyНет
Write Your Own Review
You're reviewing:Dynaudio BM 9S