Doepfer A-172 Maximum / Minimum Selector
Doepfer A-172 Maximum / Minimum Selector is a great tool to mangle CV or audio signals, oscillator waveforms, and so on. It can be used as a logic module for rhythmic manipluations as well. One of the smallest modules with the biggest additions to your eurorack system!
Наличие: Limited stock
Ships today if ordered in the next 6 hours and 24 minutes!
Doepfer A-172 Maximum / Minimum Selector is a great tool to mangle CV or audio signals, oscillator waveforms, and so on. It can be used as a logic module too for rhythmic manipluations too. One of the smallest modules with the biggest additions to your eurorack system!
Doepfer A-172 Maximum / Minimum Selector is a minimum/maximum selector module and is equipped with four analog inputs and two analog outputs (minimum, maximum). The main application of the module is the processing/mixing of control voltages, e.g. random voltages, ADSR, LFO, S&H, ribbon CV, theremin-CV and similar, but even for audio signal processing the module can be used (e.g. several outputs of the same or different VCOs). The module permanently picks the maximum resp. minimum voltage out of the four input signals and outputs these voltages to the maximum resp. minimum jack socket.
To adjust offset and amplitude for each input independently (i.e. to bring the signal into the right "position" with the desired level) we recommend to combine the module with a slew limiter or polarizer. The sketch below shows the basic principle of the max/min module by means of three sine waves (e.g. three LFOs) with different frequencies and different levels. The module can be used also as a simpe half-wave rectifier.
For more detailed information please look at the English user's manual
|Stock Text||in 7-9 days|
|Order Processing Time||Н/Д|
|Expected In-Stock Date||Н/Д|
|On Pre-Order Until||Н/Д|
|Hide Ship Date?||Нет|