4ms Pedals - RCDBO kit

4ms Pedals - RCDBO kit adds new functions to the ÿ4ms Pedals - Rotating Clock Divider which had not been accessible at the front panel of the original module. It is also available as a diy kit which is not so hard to build.
59,00 € 49,17 €

Наличие: Limited stock

Ships today if ordered in the next 1 hour and 23 minutes!

SKU
4msRCDBOkit

4ms Pedals - RCDBO kit adds new functions to the ÿ4ms Pedals - Rotating Clock Divider which had not been accessible at the front panel of the original module. It is also available as a diy kit which is not so hard to build.


Build your own Rotating Clock Divider Breakout, with the 4ms Pedals - RCDBO kit.

The Do-it-yourself kit includes all the parts necessary to build a fully-featured RCD Breakout. This is a beginner-level kit, you need only minimal prior experience, but you must have some basic hand tools (flush snips, needle-nose pliers, and a wire stripper).

The RCD Breakout adds features to the Rotating Clock Divider module. Six switches allow you to set the maximum Divide-by amount, Gate or Trigger mode, Counting mode, Spread mode, and Auto-Reset. The RCD Breakout requires the RCD to function, and does not use any extra power.

Module size:

The RCD is 4HP and 48mm (1.85")

Power consumption:

+12V rail: __mA

+5V rail: not used

-12V rail: not used

More Information
Width (HP)Нет
Depth (mm)Нет
Skiff friendlyНет
Write Your Own Review
You're reviewing:4ms Pedals - RCDBO kit