4ms Pedals - Quad Clock Distributor (QCD)

If you want to have just one clock module the 4ms Pedals - Quad Clock Distributor (QCD) should be it. Ideal for generating fun clock rhythms within the module but it really shines with its expansion module. A hands-on quad module that will provide you with enough clocks and fine-tuned grooves: much more and much better than you had wanted it.
229,00 € 190,83 €

Наличие: Limited stock

Ships today if ordered in the next 7 hours and 15 minutes!

SKU
4msQCD

If you want to have just one clock module the 4ms Pedals - Quad Clock Distributor (QCD) should be it. Ideal for generating fun clock rhythms within the module but it really shines with its expansion module. A hands-on quad module that will provide you with enough clocks and fine-tuned grooves: much more and much better than you had wanted it.


4ms Pedals - Quad Clock Distributor (QCD) 

Basic features

  • Four CV-controlled Clock Divider/Multipliers
  • Tap tempo button and five sync'ed clock outputs make the QCD perfect for head-of-the-chain "Master" clock module
  • Tap clock output runs at the tapped tempo (even if other channels are being clocked externally)
  • Create complex rhythmic patterns by patching multiple channels into each other's Div/Mult CV and Reset
  • Each of the four channels has an independent clock IN, OUT, Reset and Div/Mult CV

Divide or Multiply incoming clock from /32 to x16 on each channel:

  • -Detented knob to snap to integer division/multiples
  • -CV jack to modulate Div/Mult amount
  • Reset jack (per channel) restarts the clock when a trigger is received (alters phase of clock)
  • Clock input jacks are normalized downwards: Tap->Red->Black->Blue->Green
  • Clock outputs stop automatically when incoming clock stops
  • LEDs blink to output clocks' tempos
  • 5V clock output pulses, fully buffered. Default is square-wave, and PW is controllable with expander
  • Daisy chain multiple QCDs or other clock modules using Tap Out jack
  • Header on the PCB to connect to Quad Pingable LFO (QPLFO) to provide four CV Skew-able, CV Div/Mult-able envelopes
  • Interfaces with QCD Expander for more features (Pulse Width, Inverted Gate, attenuverters for CV inputs)

Module size: The QCD is 10HP and 1.57 inches (40mm) deep.

All pots have a metal shaft and nut.

Power consumption: A jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail.

+12V rail: 48mA with jumper selecting external 5V 88mA with jumper selecting internal 5V.

+5V rail: 41mA with jumper selecting external 5V not used (0mA) with jumper selecting internal 5V.

-12V rail: 40mA

More Information
Width (HP)Н/Д
Depth (mm)Н/Д
Skiff friendlyНет
Write Your Own Review
You're reviewing:4ms Pedals - Quad Clock Distributor (QCD)