Pittsburgh Modular - InOut

The Pittsburgh Modular - InOut solves the problem of gain difference between line level and modular level signals. Modular level signals are very hot: approx. 20 times hotter than line level signals. Thanks to the switches and the two-sized jack sockets this module is a winner in the category of affordable output modules.

€98.00
Availability: Out of stock
SKU
pIO

The Pittsburgh Modular - InOut solves the problem of gain difference between line level and modular level signals. Modular level signals are very hot: approx. 20 times hotter than line level signals. Thanks to the switches and the two-sized jack sockets this module is a winner in the category of affordable output modules.


Pittsburgh Modular - InOut - Multi-purpose Input and Output Module - running out, sales while stock lasts

A two way communication line for audio between a modular the outside world. The InOut is divided into two sections, output and input.

An attenuated line out allows the InOut to patch audio from the modular directly into effects pedals, mixers, audio interfaces, amplifiers, pa systems, or anything else that takes a 1/4" jack. The 1/4" mono output can be used as a line out for the modular or as an effects send that uses the input section for the effects return.

The input section consists of a switched 25x/75x preamp designed to amplify the audio from the 1/4" mono input to modular levels. Guitars, synthesizers, effects pedals, and line level audio can be inserted into the modular signal chain.

The InOut is useful even without external patching. The two 1/4" jacks are normaled together so with no 1/4" return plugged in, the audio from the input is automatically routed through the amplifier to the output. At 25x, this allows the InOut to be a great amplifier for boosting modular audio signals or switch to 75x amplification and overdrive the signal to distortion.

Output Section Features:

2 Channel Unity Gain Mixer with Attenuated 1/4" Line Output

Output Section Normaled to Input Section

Input Section Features:

25x/75x Switchable Gain Amplifier

Attenuated 1/4" Input Jack

3.5mm Output Jack

InOut Specs

Size: 6hp

Module Depth 43mm

Power Usage: +12v 20mA, -12v 20mA. Does not require +5v.

Write Your Own Review
You're reviewing:Pittsburgh Modular - InOut