Kenton Modular Solo MIDI-CV/ Gate Interface

One of the pioneering MIDI-CV intefaces for eurorack from the most reliable manufacturer if you are talking about MIDI-CV conversion or utlities. The best kind from the best maker.

€259.20
Availability: Out of stock
SKU
KTMS

One of the oldes MIDI-CV intefaces for eurorack from the most reliable manufacturer if you are talking about MIDI-CV conversion or utlities. The best kind from the best maker.


Thee Kenton Modular Solo MIDI-CV/ Gate Interface is supplied complete with ribbon cable ready to fit into any Eurorack (A100) format modular system.

Power is supplied by the power supply in the modular case via the backplane

Power consumption +12V supply 85mA max / −12V supply 3mA

+5v supply is not required (needs +/−12V only)

CV & Gate signals can be sent via the ribbon cable to the system bus - selected using jumpers

MIDI In & Out on DIN sockets (MIDI Out can be switched to give DIN Sync 24 instead)

Analogue output CV on 3.5mm mono jack (V/oct or Hz/V or 1.2V/oct)

Gate on 3.5mm mono jack (Gate or S-trig – with or without pullups)

Aux1,2,3,4 on 3.5mm mono jack (all continuously variable)

2x independent clock outs on 3.5mm mono jack

Weight 170g

Dimensions 128mm high (3U) x 50mm wide (10HP) x 80mm deep

D to A conversion for main CV 16 bit high quality / low drift DAC

Non-volatile memory EEPROM (no back-up battery required)

Processor 32 bit ARM processor

Write Your Own Review
You're reviewing:Kenton Modular Solo MIDI-CV/ Gate Interface