Intellijel designs - Triatt

The Intellijel designs - Triatt is a module that everyone should have, let it be a big or small eurorack system. Being able to use it as a mixer, attenuator, polarizer and CV source will bring your existing modulation signals into new dimensions!
€96.00
Availability: In stock
SKU
idtr
Intellijel designs - Triatt is available to buy in increments of 1

The Intellijel designs - Triatt is a module that everyone should have, let it be a big or small eurorack system. Being able to use it as a mixer, attenuator, polarizer and CV source will bring your existing modulation signals into new dimensions!


Intellijel designs - Triatt

triple attenuator, inverter, attenuverter and DC voltage source

This is a utility module we found ourselves always needing and using. The three well spaced knobs can act as active attenuators, attenuverters (bipolar) and inverting attenuators depending on the three position switches.

each input is normaled to a dc voltage but this voltage is selectable for each channel to be 5v or 10v via jumpers. so with nothing plugged into the jacks, each knob controls a voltage amount. so if the rear jumper for channel a was set to 5v then the knob a would control the following ranges on output a: position 1: 0 to -5v, position 2: -5 to +5v, and position 3: 0 to +5v

  • skiff friendly (single pcb)
  • 3 modes for each channel
  • 5/10v normalling to inputs
  • with external signals it acts as active/buffered attenuator/attenuverter/inverter
Write Your Own Review
You're reviewing:Intellijel designs - Triatt