MFB Modul VCA
Elérhetőség: Limited stock
Ships Monday, July 24 if ordered in the next 1 day, 22 hours and 7 minutes!
The MFB Modul VCA covers one of the most underrated functions in an eurorack modular system, that is, amplification and attenuation of audio or CV signals. Thanks to the plenty of inputs and affordability, users still praise this module.
The VCA (Voltage Controlled Amplifier) module is a classic amplifier to control audio- and CV-signals.
MFB-VCA offers three inputs, of which input 1 can be continuously attenuated. Inputs 2 and 3 offer no attenuators but different sensitivities. They are intended as alternatives for different signal sources rather than to be mixed.
Both CV-inputs can be adjusted in amplification. An envelope generator will typically control CV-1. A distinctive feature for CV-input 2 is its dependency to CV-input 1. Only if voltage is applied to CV-1, any CV-2 control becomes active. A typical application would be a dynamic tremolo effect: With CV-1 under envelope control and CV-2 under LFO control, the tremolo will only be audible with a note held. Typical parallel CV-inputs found in other modules would need a second VCA-module to achieve this effect.
There are two parallel outputs: Output 1 has fixed level and output 2 offers variable attenuation.
The module has a width of 40 mm (8 HP).
|Stock Text||Shortly Available|