Medic Modules - EKG

nincs
The Medic Modules - EKG is one of the more feature-rich and inspiring sequencers in the eurorack world. Thanks to the lined front panels and the LED sliders, you will never get lost in setting your sequences right. You might think that it occupies too much space. But personally, if you try it, you realise that it is exactly the space you need to decently control a good analog sequencer.
283,00 EUR 235,83 EUR

Elérhetőség: Limited stock

Ships Monday, July 24 if ordered in the next 1 day, 22 hours and 5 minutes!

SKU
asMEDekg

The Medic Modules - EKG is one of the more feature-rich and inspiring sequencers in the eurorack world. Thanks to the lined front panels and the LED sliders, you will never get lost in setting your sequences right. You might think that it occupies too much space. But personally, if you try it, you realise that it is exactly the space you need to decently control a good analog sequencer.


The Medic Modules - EKG (Elektro Kardio Gramm) is a versatile 8-step analogue sequencer designed to fit the euro rack convention. Each step has a unique Function Control and can be turned off, skipped, repeated or set as a reset point.

Modes: Off (rest), x1, x2, x3, x4, Skip, Reverse and Rest.

The Defibrillator ships in two design schemes: Plain and Bloody (awesome).

Mode 1: This is essentially a Rest. No Gate sent out. OFF.

Mode 2: The step is played once, with one Gate being x1 sent out.

Mode 3: The step is played twice, with two Gates being x2 sent out.

Mode 4: The step is played thrice, with three Gates being x3 sent out.

Mode 5: The step is played four times, with four Gates x4 being sent out.

Mode 6: The step is entirely missed and the sequencer SKIP instead jumps to the next step.

Mode 7: The sequencer plays backwards all the REV(erse) way to step one.

Mode 8: Sequencer resets to step One. This step is RESET not ‘played’. Use this to change sequence length.

All parameters are set with red illuminated sliders.

CLOCK IN: This is the clock input. Use a 5V clock signal, or a signal from an LFO

TEMPO 1/2 IN: When this socket sees 5V, the sequencer will run at half speed.

RESET IN: When this socket sees a 5V signal, the sequencer will reset to Step 1.

CV OUT & RANGE: Connect the CV out to your modular synth’s VCO to control Pitch, or to Cut-Off on your Filter

GATE OUT: Connect this to the EG Trigger input on your synth. Output is 5V.

Width: 38HP

Depth: 25mm

Voltage: -/+12V

Power Consumption: +12V, 15mA / -12V, 28mA

Doepfer style power cable included.

​Screws not included.

0.285kg

*Note: Medic Modules do not require the optional 5V power rail when used in Doepfer cases.

More Information
Category Filter Sequencer
Write Your Own Review
You're reviewing:Medic Modules - EKG