Analogue Solutions - Eurokorn
Elérhetőség: Can be ordered upon request
The Analogue Solutions - Eurokorn builds upon the classical times of synth-pop music. A time where you could compose music with knobs and your ears. This two rows of sequencing will provide you with that exact practice and experience: we have been able to generate a lot of heavy melodies which is always a convincing experience. A lot of songs are laid down in this machine!
Note: The Analogue Solutions - Eurokorn black version is 'standard'
KEY FEATURES OF EURORACK OBERKORN
48 analogue CV knobs, 16 Gate switches, 17 Blue LEDs.
3x analogue CV channels, 2x Gate channels
CV control of Speed / Tempo
Rugged steel construction
Unique 'binary' inputs (can be used as outputs too!)
more more more!
The Gate output is approx. 10V Positive trigger - designed to work with just about all monosynths that have a Gate input. No doubt there are some rare exceptions.
Note; that Korg MS and Yamaha CS series use an inverted gate input. It is possible to custom order a modified Oberkorn with one or both Gate outputs modified to have inverted 5V outputs. This has been tested on an MS20 only.
Eurorack Oberkorn is identical to the stand-alone non-euro version - except it does not have MIDI-Trigger. This is because the MIDI sockets are on the rear of the case. The Eurorack version is modules - it has no rear for MIDI sockets - and, there is no space on the front for any more sockets! It is full! Use our MT9 MIDI-Trigger module if you want a quick and easy way to sync to MIDI.
NOTE: Oberkorn required +5V in addition to -12V and +12V. On Doepfer cases, 5V is an option. Buy the option if you have a Doepfer case.
Specification... Controls and Features Other details
CV 3 CV channels, 16 step Each CV channel has a range control and transpose CV input
Gate 2 Gate channels, 16 step approx 10v gate output. Includes 'Legato' switch to chain consecutive ons.
Clock LFO clock (Internal clock speed is about 1Hz to 30Hz, CV control of tempo clock output, external clock in
Control input 4 bit binary input to control step number
Buttons Reset to 1, Reset to 16, and single step advance
Reset Reset input. +5v resets the sequencer to step 1. Change sequence length to other than 16.
Size / Mass 3U / 84HP - standard Euro Rack size.
Power Requires 5V, 12V, -12V
5V / 50mA
12V / 30mA
-12V / 15mA