4ms Pedals - VCA Matrix

nincs
The 4ms Pedals - VCA Matrix is a totally satisfying amount of high-quality VCA's packed in one module in a matrix fashion, with glowing buttons: you can control your eurorack modular system like a commander of a spaceship, and have super clean sound. The quality and quantitiy and expansion possibilities make this module a very deep and completely powerful enhancement of your system.
118 683,94 Ft
testing final

Elérhetőség: Limited stock

Ships today if ordered in the next 11 hours and 8 minutes!

SKU
4msVCAM

The 4ms Pedals - VCA Matrix is a totally satisfying amount of high-quality VCA's packed in one module in a matrix fashion, with glowing buttons: you can control your eurorack modular system like a commander of a spaceship, and have super clean sound. The quality and quantitiy and expansion possibilities make this module a very deep and completely powerful enhancement of your system.


4ms Pedals - VCA Matrix

4 CV/audio inputs and 4 outputs (buffered and dc-coupled)

Full range (0Hz - 20kHz) for both Control and Signal inputs, allows for AM effects, etc.

16 VCA's using high quality SSM chips

Attenuation/gain range from -100dB (mute) to 0dB (unity). Up to +20dB boost with trimpot adjustment.

Playable surface with 16 latching Mute LED buttons, used to mute each VCA individually (Mute button disconnects Control jack and Level knob, and fully attenuates the VCA)

LED button brightness indicates amount of attenuation and Control CV signal

16 Control jacks for VCA level control

16 Level knobs attenuate the incoming Control signals. The Level knobs act as manual level controls when nothing is plugged into the Control jack Exponential VCA response in low control voltage range, pseudo-log response in higher voltage range.

"Soft Limit" effect limits gain to prevent clipping, while still responding to higher Control voltages with more "punch" and wider pulses

Matrix Expandability: VCA Matrices can be connected to form a larger matrix using headers on the back (4x8, 8x8, 12x4, etc)

Control Expandability: 16-pin header on back side of PCB allows an external device to control all VCAs: e.g. patch recall, patch sequencing, preset patterns such as quadrature panning, etc.

Suitable as a 4x4 mixer, splitter, dynamic signal router, limited waveshaper, etc.

Module size:

The VCA Matrix is 26HP, and 1.0 inches deep (25mm)

Power consumption:

A jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail.

-12V rail: 110mA max

+12V rail:

80 max with jumper selecting external 5V

110mA max with jumper selecting internal 5V.

+5V rail:

40mA max with jumper selecting external 5V

not used (0mA) with jumper selecting internal 5V.

User Manual

More Information
Width (HP) Nem 
Depth (mm) Nem 
Skiff friendly Nem 
Write Your Own Review
You're reviewing:4ms Pedals - VCA Matrix