4ms Pedals - Rotating Clock Divider (RCD)

nincs
The 4ms Pedals - Rotating Clock Divider ÿ(RCD) brought a novel concept into the already existing functionality of a clock divider: like in a "snake-game", you can shift the outputs of the divider, and add a new dimension to your rhythmic / trigger patterns. It is also available as a diy kit which is not so hard to build.
194,00 EUR 161,67 EUR

Elérhetőség: Raktáron

Ships tomorrow if ordered in the next 22 hours and 40 minutes!

SKU
4msRCD

The 4ms Pedals - Rotating Clock Divider ÿ(RCD) brought a novel concept into the already existing functionality of a clock divider: like in a "snake-game", you can shift the outputs of the divider, and add a new dimension to your rhythmic / trigger patterns. It is also available as a diy kit which is not so hard to build.


4ms Pedals - Rotating Clock Divider (RCD)

Divide-by-1 to Divide-by-64, on 8 output jacks

CV Rotate jack to shift divide-by amount on each jack

CV Reset jack to reset/re-sync all jacks

Optional break-out panels to expand functionality (Auto-reset, selectable Divide-by range, Gate/Trigger, Up/Down-counting)

Jacks

Clock Input (5V to 15V clock, rising edge triggered), max 3kHz

CV Rotate (0V to +5V input)

CV Reset (5V to 15V trigger)

Divided Clock Outputs (8 jacks):

Divide-by-(1+R)

Divide-by-(2+R)

Divide-by-(3+R)

Divide-by-(4+R)

Divide-by-(5+R)

Divide-by-(6+R)

Divide-by-(7+R)

Divide-by-(8+R)

...where R is the CV Rotation.

Selectable Gate/Trigger mode:

:

Selectable Divide range up to Divide-by-64:

Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.

Selectable Auto-reset:

Auto-reset will reset the divide counter every 16/24/32 clocks, which keeps the beats more "dance-able" even when using the "weird" clock divisions (3/5/6/7/9/10/11/etc..) Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.

Module size: :

The RCD is 4HP and 35mm (1.39") deep:

Power consumption: :

5VSEL Jumper set to INT::

33mA maximum power draw from +12V rail:

0mA max on the +5V rail:

4mA maximum power draw on the -12V rail:

5VSEL Jumper set to EXT::

19mA maximum power draw on the +12V rail:

14mA max on the +5V rail:

4mA maximum power draw on the -12V rail:

User Manual

More Information
Category Filter Clock, Trigger
Write Your Own Review
You're reviewing:4ms Pedals - Rotating Clock Divider (RCD)