Expert Sleepers - ES-7 CV Input Expander

The Expert Sleepers - ES-7 CV Input Expander further expands the inputs of the ES-6 expansion module ES-6, which can make your analog signals "talk to" parameters in your DAW by means of a CV-to-lightpipe conversion in the circuitry. It is an extension module for the ES-3 and cannot be used without it. Experts Sleepers are the best when it comes to building bridges between your modular system and your DAW.
€81.60
Availability: Out of stock
SKU
ES-7

The Expert Sleepers - ES-7 CV Input Expander further expands the inputs of the ES-6 expansion module ES-6, which can make your analog signals "talk to" parameters in your DAW by means of a CV-to-lightpipe conversion in the circuitry. It is an extension module for the ES-3 and cannot be used without it. Experts Sleepers are the best when it comes to building bridges between your modular system and your DAW.


The Expert Sleepers - ES-7's specifications are as follows:

  • Panel width: 4HP
  • Module depth: 50mm
  • Digital I/O: connection from ES-4 or ES-6 module
  • Analogue inputs: 2x 3.5mm jacks, DC-coupled
  • Input voltage range: ±10V
  • Input impedance: effectively infinite (FET buffer)
  • A/D conversion: 24 bit, 103dB SNR typical
  • Current draw: 27mA on the +12V rail, 10mA on the -12V rail (37mA total)

The front panel is drilled for both Doepfer and Analogue Systems mounting holes (using a 'slot' rather than a single round hole). The power connector is a Doepfer standard 16 way IDC, with -12V furthest from the top of the board.

For more detail, please see the user manual.

Write Your Own Review
You're reviewing:Expert Sleepers - ES-7 CV Input Expander