Erica Synths - MIDI to Trigger

The Erica Synths - MIDI to Trigger is a really-easily programmable MIDI-not to analog trigger converter module. After the easy setup, different notes of your MIDI-sequencer or DAW can send triggers to your eurorack modules, and also the last channel can send MIDI clock too!

Control your drum modules and trigger events on your modular from any MIDI sequencer with the Erica Synths - MIDI to Trigger!

If you want to use a MIDI sequencer to trigger events on your modular synthesizer (e.g. using the hexinverter.net Mutant drums range or Tiptop Audio classical drum modules or envelope generators to control VCAs), Erica Synths - MIDI to trigger module is just what you need; it converts ANY MIDI notes to eight 10ms Trigger signals. When designing the module, the manufacturers put usability as priority; it will take you seconds to program the module. It works with any MIDI sequencer & controller so there is no need to change MIDI controller settings, instead, you reprogram the module.

Features:

● Converts MIDI notes into Trigger signals
● 8 Trigger outputs
● LED indication of active Triggers
● Easy to assign MIDI notes to triggers
● Easy to set MIDI channel
● MIDI clock output
● Diode protection on reversed power supply

Technical characteristics:

Trigger signal level…..…..............+5V
Number of Trigger outputs.……....…8
Power consumption…................15mA@+12V, 0mA@-12V
Module width……..............……..…6HP
Module depth…………..........… …..25mm

User Manual