Doepfer A-180 Multiples 1

Doepfer A-180 Multiples 1 are useful when you ran out of signals, and would like to modulate two or maximum seven other parameters in your system. Check out the thinner and switched versions of this module too!

€35.04
Availability: Out of stock
SKU
A-180

Doepfer A-180 Multiples 1 are useful when you ran out of signals, and would like to modulate two or maximum seven other parameters in your system. Check out the thinner and switched versions of this module too!

Doepfer A-180 Multiples 1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Though these modules are very "primitive" they are required very often in patches (e.g. to distribute a clock signal or a control voltage). Within a big A-100 system sufficient multiples should be planned. The function of A-180-1 and A-180-2 is the same. The modules differ only in the front panel width. For the distribution of control voltages used for pitch control of several VCOs the buffered multiple A-185-2 is recommended. This module has a built in buffer (and a lot of additional features like CV summing) that avoids small voltage losses that may be heard in pitch control applications.

For more detailed information please look at the English user's guide

Write Your Own Review
You're reviewing:Doepfer A-180 Multiples 1