Doepfer A-174-1 Joy Stick

Doepfer A-174-1 Joy Stick is meant to add dynamic manual crossfading control between two signals. The joystick's range covers an XY axis, and a gate output is also available, so you can nicely fade and make events start in your system!

€99.00 €82.50

Availability: In stock

Ships Monday, November 27 if ordered in the next 2 days, 15 hours and 16 minutes!

SKU
A-174-1

Doepfer A-174-1 Joy Stick is meant to add dynamic manual crossfading control between two signals. The joystick's range covers an XY axis, and a gate output is also available, so you can nicely fade and make events start in your system!


Doepfer A-174-1 Joy Stick module outputs 2 control voltages generated by a spring-loaded X/Y cross potentiometer (so-called joy stick). For each output the voltage offset (zero setting) can be adjusted. Each output is equipped with 2 LEDs for positive/negative display of the output voltages. If the spring is removed for one direction the joy stick is no longer spring-loaded for this direction (as the spring is destroyed when removed this cannot be re-established !). We use a high quality joy stick made by ALPS in the A-174.

Application: manual X/Y CV control of other A-100 modules, e.g. VCF, VCA, VCO, Phaser, BBD modules, wave shaper/multiplier, frequency shifter, VCLFO, VCADSR, panning, etc. In combination with the Dual Voltage Controlled Crossfader A-134-2 manually generated crossfades between audio or modulation sources can be realized.

For more detailed information please look at the English user's guide

The pcb is equipped with two jumpers that can be removed to obtain a voltage plateau around the center position, i.e. the output voltage does not change for a small movement range. The jumpers are labelled JP4 (Y plateau) and JP5 (X plateau). Removing the jumper activates the plateau. The following picture shows the position of the jumpers:

 

More Information
Width (HP) 10
Depth (mm) 45
Skiff friendly No
Write Your Own Review
You're reviewing:Doepfer A-174-1 Joy Stick