Doepfer A-165 Dual Trigger Inverter/Modifier

Doepfer A-165 Dual Trigger Inverter/Modifier changes the polarity, hence creates mirror images of trigger signals. However, on an another input, a newly derived approx. 50msec long trigger signal is generated once the input signal starts to rise or fall. This way, the module can create interesting temporal "echoes" within a patch.

€57.00
Availability: Out of stock
SKU
A-165

Doepfer A-165 Dual Trigger Inverter/Modifier changes the polarity, hence creates mirror images of trigger signals. However, on an another input, a newly derived approx. 50msec long trigger signal is generated once the input signal starts to rise or fall. This way, the module can create interesting temporal "echoes" within a patch.


The Doepfer A-165 Dual Trigger Inverter/Modifier contains two separate trigger modifiers, to use with logical / digital levels (gate, clock, trigger). Each half of the module enables signals generated by the A-100 to communicate with other instruments (such as an external sequencer), or is simply used where you want to reverse a trigger polarity.


Whatever signal is patched into the input is inverted by the module, and fed out of the Inv. Out (inverted output) socket. At the same time, a trigger signal of roughly 50 ms is generated every time an edge of the trigger pulse is sensed (negative as well as positive). This trigger signal is available at the +/- output.


Two LEDs act as indicators showing the level of signal available at the two outputs.


When both units are daisy-chained the module can be used as level shifter for gate/trigger/clock signals (from min. +2,5V up to +12V)

Technical data:
minimal input level of the gate/trigger/clock signal: ~ +2,5V
output level: min. ~ +11V
lenght of the trigger pulses at output +/-: ~ 50 ms
For more detailed information please look at the English user's guide

Write Your Own Review
You're reviewing:Doepfer A-165 Dual Trigger Inverter/Modifier