Doepfer A-161 Clock/Trigger Sequencer

Doepfer A-161 Clock/Trigger Sequencer is a simple yet really usable clock sequencer based on the A-160 Clock divider, that can be used in ryhtmic and even audio switching patches.It is up to you how this sequencer will act - it might even act upon the original A-160 Clock Divider reset or clock input creating a clock feedback patch!

€64.00 €53.33

Availability: Limited stock

Ships today if ordered in the next 12 hours and 29 minutes!

SKU
A-161

Doepfer A-161 Clock/Trigger Sequencer is a simple yet really usable clock sequencer based on the A-160 Clock divider, that can be used in ryhtmic and even audio switching patches.It is up to you how this sequencer will act - it might even act upon the original A-160 Clock Divider reset or clock input creating a clock feedback patch!


The Doepfer A-161 Clock/Trigger Sequencer is an eight-step Clock Sequencer which is internally connected to the Clock Divider (A-160). Eight outputs are sequentially switched by the clock signals from the A-160 (see Fig. 1) and can act, for instance, as sequential rhythmic triggers for an envelope. The reset on the A-160 also works on the A-161 (instant return to Step 1). The low/high levels of the output signals are 0V and about +10V. In combination with a mixer (A-138) short analog sequences can be generated. Our MIDI-Analog-Sequencer MAQ16/3 is suitable for MIDI-controlled analog sequences up to 48 steps. A "real" analog sequencer with 8 steps is the A-155.

For more detailed information please look at the English user's manual

The A-161 requires an Clock Divider A-160-1 and has to be mounted directly to the right of the A-160.

More Information
Width (HP) 4
Depth (mm) 40
Skiff friendly No
Write Your Own Review
You're reviewing:Doepfer A-161 Clock/Trigger Sequencer