Doepfer A-145 Low Frequency Oscillator LFO

Doepfer A-145 Low Frequency Oscillator LFO is a simple modulation source which can be reset, so interesting synced modulation patterns can be achieved with it. Thanks to the original and inverted saw outs, panning or crossfading can also be realised with it for example. Luckily, the module can also be used in audio range, and can play an integral part in more interesting tonalities within FM patches.

€69.00
Availability: In stock
SKU
A-145
Doepfer A-145 Low Frequency Oscillator LFO is available to buy in increments of 1

Doepfer A-145 Low Frequency Oscillator LFO is a simple modulation source which can be reset, so interesting synced modulation patterns can be achieved with it. Thanks to the original and inverted saw outs, panning or crossfading can also be realised with it for example. Luckily, the module can also be used in audio range, and can play an integral part in more intersting tonalities within FM patches.


Doepfer A-145 Low Frequency Oscillator LFO - a low frequency oscillator, which produces cyclical control voltages in a very wide range of frequencies. Five waveforms are available: sawtooth, inverted sawtooth, triangle, sine and square wave. The LFO can be used as a modulation source for any number of modules - for instance modulating the pulse width or frequency of a VCO, modulation of the cut-off frequency of a VCF, or amplitude modulation with a VCA. A three-way switch lets you select three frequency ranges, spanning from one cycle every several minutes at the lowest, to moderate audio frequency at the highest (about 4-5 kHz). The LFO signal can also be synchronised, via the reset input.

For more detailed information please look at the English user's manual

Write Your Own Review
You're reviewing:Doepfer A-145 Low Frequency Oscillator LFO