Doepfer A-110-2 Basic VCO Vintage Edition

The Doepfer A-110-2 Basic VCO is one of the later oscillator designs by Doepfer. It is also one of the smallest. Testing this oscillator in the showroom was a pleasure, because we heard a convincing sound.
€129.60 €108.00
Availability: In stock
SKU
A-110-2v
Doepfer A-110-2 Basic VCO Vintage Edition is available to buy in increments of 1

The Doepfer A-110-2 Basic VCO is one of the later oscillator designs by Doepfer. It is also one of the smallest. Testing this oscillator in the showroom was a pleasure, because we heard a convincing sound.

Module A-110-2 is a low-cost voltage-controlled oscillator. It's a slightly reduced version of the standard VCO A-110-1. Compared to the A-110-1 the A-110-2 has no sine output and the (expensive) octave rotary switch is replaced by a 3-position toggle switch. In return the A-110-2 is equipped with an additional linear FM input and a soft sync input. A jumper is used to select the range of the tune control between about 1/2 octave and about 4 octaves. The width of the module is only 8 HP compared to the 10 HP of the A-110-1.

All other features are essentialy the same as for the A-110-1.

Width:10HP

Depth: 50 mm (measured from the rear side of the front panel)

Current: 150 mA (heat up period about 30 seconds), 60 mA (long-term current)

Write Your Own Review
You're reviewing:Doepfer A-110-2 Basic VCO Vintage Edition