Doepfer A-100MC Mini Case black

Doepfer A-100MC Mini Case black is a true beauty to start your modular system with. It can house 4 8HP wide modules, it is truly cost-effective, and can fit in your backpack.

€110.40
Availability: Out of stock
SKU
A-100MCb

Doepfer A-100MC Mini Case black is a true beauty to start your modular system with. It can house 4 8HP wide modules, it is truly cost-effective, and can fit in your backpack. 

  • A-100 miniature case ("A-100 beauty case")

  • built-in A-100 miniature power supply/bus board with higher output current (200 mA @ +/-12V and 50 mA @ +5V) 

  • useable width: 32 HP (e.g. four modules with 8 HP), new since September 2008, the former version had only 28 HP available

  • 4 bus connectors (i.e. max. 4 modules)

  • alternatively raw wood (top right picture) or or black coated (top left picture), the raw version may be varnished by the customer in any desired color (e.g. with a color spray can, see red example)

  • outside measures: about 180 width x 155 height x 125 depth

  • max. module depth in the left area: about 55 mm (because of the heat sinks of the power supply), the width of the area with the reduced depth is about 60 mm 

  • max. module depth in the right area: about 85 mm, the width of the area with the non-reduced depth is about 100 mm

  • pay attention to the suitable module widths if you order the modules, e.g. A-112, A-113,  A-126 or A-199 (because of the spring reverb tank) cannot be mounted into the A-100MC

  • the handles on top of the cases are enclosed but not mounted, two holes with about 3 mm diameter  have to be drilled to mount the handle, if the miniatures cases have to be stacked on top of each other the handles have to be omitted

  • prices include the built-in miniature power supply/bus

  • prices do not include modules

  • versions with transformer include an external transformer (wall outlet type) with 230 V mains voltage and European mains connector. 

  • for versions without transformer an external transformer with 9V ACvoltage output and 500mA (or more) is required, attention: DC power supplies are not suitable !



Write Your Own Review
You're reviewing:Doepfer A-100MC Mini Case black