Cwejman NS-4 Noise-SampleHold-Lag

The Cwejman NS-4 Noise-SampleHold-Lag is a less wide source of top-notch randomness. Apart from 3 high-quality noise generators, you can get smooth and stepped outputs derived from these signals.

€392.00
Availability: Out of stock
SKU
CVNS4

The Cwejman NS-4 Noise-SampleHold-Lag is a less wide source of top-notch randomness. Apart from 3 high-quality noise generators, you can get smooth and stepped outputs derived from these signals.

The Cwejman NS-4 Noise-SampleHold-Lag is a true analogue noise generator with four oise/random signal outputs; Sample and Hold (S/H), White, Pink and Red.

S/H

  • The S/H generates a random signal controlled by two voltage controlled parameters; RATE and LAG (slew rate). 
  • The RATE controls the period for every sample point from 10 seconds (0.1 Hz) to 2 millisecond (500Hz). 
  • The LAG controls the slew rate of the incoming S/H signal from 0.1 Hz to 1000 Hz. 
  • The outgoing signal is, in other words, filtered by a voltage controlled low pass filter with 12 dB/octave slope. 
  • The S/H RATE and the S/H LAG can be controlled manually by knobs and by external signals (RATE CV and LAG CV). Rate generator can be sync-ed by an external signal and with any shape (S/H TRIG input).
  • The S/H can be also used for an external signal (EXT S/H) and the level of incomming signal is controlled manually (EXT S/H LEVEL). 


WHITE noise
white noise is a full audio bandwidth noise generator.

PINK noise
pink noise is a filtered white noise generator by 3dB/octave across the whole audio frequency range.

RED noise
red noise is hard filtered and contains essentially only frequencies up to 200 Hz.

English Manual (pdf) 

Write Your Own Review
You're reviewing:Cwejman NS-4 Noise-SampleHold-Lag