Cwejman BLD Bass and Drum Module

The Cwejman BLD Bass and Drum Module - bass and lead sounds with the most high-end components which will never disappoint you in any mix. Users have used it for even snare-drum purposes, and with its 2 envelope generators, it will be easily integrated to blend other modules with it. You will never have to worry of tuning your drum sounds.

€680.40
Availability: Out of stock
SKU
CWBLD

The Cwejman BLD Bass and Drum Module - bass and lead sounds with the most high-end components which will never disappoint you in any mix. Users have used it for even snare-drum purposes, and with its 2 envelope generators, it will be easily integrated to blend other modules with it. You will never have to worry of tuning your drum sounds.

The Cwejman BLD Bass and Drum Module has all components and functions necessary for generating bass lead and drum sounds with focus on bass drum sounds. It can be trigged by a push button or by an external signal (any shape). The pitch, cutoff frequency, transient times and amplitude are also voltage controllable by external signals. The BLD contain main sound generator (OSCILLATOR) and noise generator and modifiers such as low pass filter, amplifier and two transient (contour) generators. The oscillator has two manual pitch controllers (FINE, COARSE) and two inputs for controlling the pitch by external signals: FM1 (levelled, bipolar pre-patched to transient generator AR) and FM2 (calibrated to 1 Volt/octave). Waveforms and mix between shapes is controlled manually from triangle, mix between triangle and pulse, pulse, mix between pulse and saw tooth and saw tooth). Oscillator level is controlled manually from 0 thru nominal signal strength to saturated (curved, for more punch). Pulse width is controlled manually and by an external signal (PWM). The Low Pass Filter has two audio inputs marked OSCILLATOR LEVEL and NOISE LEVEL, The CUTOFF frequency is controlled manually, by transient generators AR and AHR and by CUTOFF pre-patched to FM2 CV input.

The Noise Generator connected to the low pass filter and to the amplifier (NOISE LEVEL). It can be routed in to the amplifier (PRE) or directly to the output AMP (POST). The noise generators level is also controlled by pre-patched AR generator thru input NOISE LEVEL.

The AR and AHR transient generators are activated manually by the push button TRIG and/or by an external signal(input TRIG).

Attack, Hold and Release are manually controlled and by an external signals connected to inputs A1, R1 (AR) and A1, HOLD and R2 (AHR).

AMPLIFIERs gain is controlled by mix of AR and AHR and by an external signal connected to the input VELOCITY.

English Manual (pdf)

Write Your Own Review
You're reviewing:Cwejman BLD Bass and Drum Module