Analogue Zone - Rail 19" with lid

Build your own eurorack case with ease, choose the Analogue Zone-rail - 19" with lid. will provide you with a standard 84HP rails. Don't forget that you need 2 for a row.
€9.00
Availability: In stock
SKU
az19
Analogue Zone - Rail 19" with lid is available to buy in increments of 1

Build your own eurorack case with ease, choose the Analogue Zone-rail - 19" with lid. will provide you with a standard 84HP rails. Don't forget that you need 2 for a row.


Analogue Zone-rail - 19" with lid

Eurorack modular rail for For DIY'ers - the rail is exactly 84HP wide but you can cut it to any length you prefer! Holding your modules in place will not be a problem thanks to the lid that will hold the front panels in place.

Self-cutting screws for installing the rails in any rack or frame you prefer are included with the rails! Just screw them into the rails - no extra tools are needed for that! Note: you cannot install the modules directly on the rails - either you can solve it with sliding nuts inserted into the rails that will accept the modules screws or for a more convenient solution see the related "Analogue Zone - Threaded Strip with M3 threads" product!

Dont' forget: You need two rails for one row of modules!

432mm width (84HP) - can be installed in 19" racks

Write Your Own Review
You're reviewing:Analogue Zone - Rail 19" with lid