Analogue Solutions - Eurokorn

The Analogue Solutions - Eurokorn builds upon the classical times of synth-pop music. A time where you could compose music with knobs and your ears. This two rows of sequencing will provide you with that exact practice and experience: we have been able to generate a lot of heavy melodies which is always a convincing experience. A lot of songs are laid down in this machine!
€659.00
Availability: Out of stock
SKU
asEUROK

The Analogue Solutions - Eurokorn builds upon the classical times of synth-pop music. A time where you could compose music with knobs and your ears. This two rows of sequencing will provide you with that exact practice and experience: we have been able to generate a lot of heavy melodies which is always a convincing experience. A lot of songs are laid down in this machine!


Note: The Analogue Solutions - Eurokorn black version is 'standard'

KEY FEATURES OF EURORACK OBERKORN

48 analogue CV knobs, 16 Gate switches, 17 Blue LEDs.

3x analogue CV channels, 2x Gate channels

CV control of Speed / Tempo

Rugged steel construction

Unique 'binary' inputs (can be used as outputs too!)

more more more!

The Gate output is approx. 10V Positive trigger - designed to work with just about all monosynths that have a Gate input. No doubt there are some rare exceptions.

Note; that Korg MS and Yamaha CS series use an inverted gate input. It is possible to custom order a modified Oberkorn with one or both Gate outputs modified to have inverted 5V outputs. This has been tested on an MS20 only.

Eurorack Oberkorn is identical to the stand-alone non-euro version - except it does not have MIDI-Trigger. This is because the MIDI sockets are on the rear of the case. The Eurorack version is modules - it has no rear for MIDI sockets - and, there is no space on the front for any more sockets! It is full! Use our MT9 MIDI-Trigger module if you want a quick and easy way to sync to MIDI.

NOTE: Oberkorn required +5V in addition to -12V and +12V. On Doepfer cases, 5V is an option. Buy the option if you have a Doepfer case.

Specification... Controls and Features Other details

CV 3 CV channels, 16 step Each CV channel has a range control and transpose CV input

Gate 2 Gate channels, 16 step approx 10v gate output. Includes 'Legato' switch to chain consecutive ons.

Clock LFO clock (Internal clock speed is about 1Hz to 30Hz, CV control of tempo clock output, external clock in

Control input 4 bit binary input to control step number

Buttons Reset to 1, Reset to 16, and single step advance

Reset Reset input. +5v resets the sequencer to step 1. Change sequence length to other than 16.

Size / Mass 3U / 84HP - standard Euro Rack size.

Power Requires 5V, 12V, -12V

Current Consumption:

5V / 50mA

12V / 30mA

-12V / 15mA

Write Your Own Review
You're reviewing:Analogue Solutions - Eurokorn