4ms Pedals - SCMBO kit
4ms Pedals - SCMBO kit adds new functions to the ÿ4ms Pedals - Shuffling Clock Multiplier which had not been accessible at the front panel of the original module. It is also available as a diy kit which is not so hard to build.
€129.60
Availability:
In stock
SKU
4msSCMBOkit
4ms Pedals - SCMBO kit is available to buy in increments of 1
4ms Pedals - SCMBO kit adds new functions to the ÿ4ms Pedals - Shuffling Clock Multiplier which had not been accessible at the front panel of the original module. It is also available as a diy kit which is not so hard to build.
Build your own Shuffling Clock Multiplier Breakout, with the SCMBO kit. The Do-it-yourself kit includes all the parts necessary to build a fully-featured SCMBO. This is a beginner-level kit, but you need some prior experience, and have basic hand tools (flush snips, needle-nose pliers, small screw driver). Multiply-by-1 to Multiply-by-32, on 8 output jacks Five Slipped/Shuffled/Skipped clock outputs (S3, S4, S5, S6, S8). Each is based on a multiple of the input clock frequency (x3, x4, x5, x6, and x8, respectively) Three steady clock outputs (x1, x2, and x8), which are not effected by Slip/Shuffle/Skip effects CV Rotate jack to shift multiply-by amount on all jacks CV Slip causes particular beats to land ahead in time Connects to the SCM Breakout for controlling more features: Pulse Width, Shuffle pattern, Skip, Re-sync, Mute, and 4x Fast ISP header: Connects to in-circuit programmer such as AVR ISP MKII for reprogramming code Maximum input frequency 3kHz Module size: The SCM is 4HP and 35mm (1.39") deep Power consumption: 5VSEL Jumper set to INT: 33mA maximum power draw from +12V rail 0mA max on the +5V rail 4mA maximum power draw on the -12V rail 5VSEL Jumper set to EXT: 19mA maximum power draw on the +12V rail 14mA max on the +5V rail 4mA maximum power draw on the -12V rail Reviews
Write Your Own Review