Kenton LNDR / Linedriver
Kenton LNDR / Linedriver - an ultra-light device capable of sending MIDI to both directions - from the best maker of MIDI devices.
Kenton LNDR / Linedriver - an ultra-light device capable of sending MIDI to both directions - from the best maker of MIDI devices.
Kenton LNDR / Linedriver is a master and slave pair that allows MIDI to be sent accurately in both directions at the same time, across distances of over 500 metres (1640 feet) using a standard CAT5 cable. This is over 33 times the distance achievable using standard MIDI cables. The Master unit is mains powered using the included PSU.
CAT5 cable is not included
Power:
9V to 12V DC (regulated or unregulated).
Dimensions:
100 x 46 x 32 mm (each unit)
Weight:
110g (each unit, excluding power supply)
MIDI:
1 x In, 1 x Out on each unit (standard 5 pin DIN connectors)
Range:
500 metres between master & slave over CAT5e cable
Power Supply
Supplied with unit. Specify UK EU or US type when ordering
Interconnect
CAT5 cable required with RJ45 connectors. Note the LNDR requires exclusive use of the CAT5 cable.