Doepfer A-173-1/2 Micro Keyboard / Manual Gate Modules

With Doepfer - A-173-1/2 Micro Keyboard / Manual Gate Modules the makers have finally created an affordable, yet extensively patchable controller for your eurorack systems VCO's and percussive sound sources as well!

€169.20
Availability: In stock
SKU
A-173-12
Doepfer A-173-1/2 Micro Keyboard / Manual Gate Modules is available to buy in increments of 1

With Doepfer - A-173-1/2 Micro Keyboard / Manual Gate Modules the makers have finally created an affordable, yet extensively patchable controller for your eurorack systems VCO's and percussive sound sources as well!

A-173-1/2 is a module combo that is used to generate a manually controlled 1V/Octave CV signal and up to 15 manually controlled gate/trigger signals.

Typical applications are the transposition of a sequence by means of the CV output (without the need of an external keyboard and CV interface) and the manual generation of gate signals for start, stop, envelope generator triggering and other trigger tasks. A-173-1 is the transmitter module and is made of a 1 ½ octaves micro keyboard and a three-position octave switch. A-173-2 is the receiver module and generates several gate/trigger signals and a 1V/Oct. CV signal.

The upper section of the module is used for the gates which are controlled by the corresponding buttons of the A-173-1. Each output can be programmed as gate (pressing/releasing the corresponding key turns the gate on/off) or toggle (pressing the corresponding key changes the state). The state of each output is displayed by an LED.

The lower section of the module is used the generate a 1V/Oct. CV signal and gate signal in the usual way. By means of the learn feature of the A-173-2 (i.e. defining the key for 0V CV) a few buttons can be separated from the CV generation section so that these buttons only control gate/trigger outputs without affecting the CV.

Write Your Own Review
You're reviewing:Doepfer A-173-1/2 Micro Keyboard / Manual Gate Modules