4ms Pedals - SCMBO kit

4ms Pedals - SCMBO kit adds new functions to the ÿ4ms Pedals - Shuffling Clock Multiplier which had not been accessible at the front panel of the original module. It is also available as a diy kit which is not so hard to build.
€129.60
Availability: In stock
SKU
4msSCMBOkit
4ms Pedals - SCMBO kit is available to buy in increments of 1

4ms Pedals - SCMBO kit adds new functions to the ÿ4ms Pedals - Shuffling Clock Multiplier which had not been accessible at the front panel of the original module. It is also available as a diy kit which is not so hard to build.


Build your own Shuffling Clock Multiplier Breakout, with the SCMBO kit.

The Do-it-yourself kit includes all the parts necessary to build a fully-featured SCMBO. This is a beginner-level kit, but you need some prior experience, and have basic hand tools (flush snips, needle-nose pliers, small screw driver).

Multiply-by-1 to Multiply-by-32, on 8 output jacks

Five Slipped/Shuffled/Skipped clock outputs (S3, S4, S5, S6, S8). Each is based on a multiple of the input clock frequency (x3, x4, x5, x6, and x8, respectively)

Three steady clock outputs (x1, x2, and x8), which are not effected by Slip/Shuffle/Skip effects

CV Rotate jack to shift multiply-by amount on all jacks

CV Slip causes particular beats to land ahead in time

Connects to the SCM Breakout for controlling more features: Pulse Width, Shuffle pattern, Skip, Re-sync, Mute, and 4x Fast

ISP header: Connects to in-circuit programmer such as AVR ISP MKII for reprogramming code

Maximum input frequency 3kHz

Module size:

The SCM is 4HP and 35mm (1.39") deep

Power consumption:

5VSEL Jumper set to INT:

33mA maximum power draw from +12V rail

0mA max on the +5V rail

4mA maximum power draw on the -12V rail

5VSEL Jumper set to EXT:

19mA maximum power draw on the +12V rail

14mA max on the +5V rail

4mA maximum power draw on the -12V rail

Reviews

Write Your Own Review
You're reviewing:4ms Pedals - SCMBO kit